Fix file name to reflect the actual function name: newfiles()

.bashrc.d/10-alias.bash

@@ -22,7 +22,7 @@ alias la='ls -laFh --color=auto'
 alias grep='grep --color=auto'
 
 # Change layout of lsblk to include FSTYPE and remove MAJ:MIN, RM, and RO collumns.
-alias lsblk='lsblk -o NAME,FSTYPE,SIZE,TYPE,MOUNTPOINT'
+alias lsblk='lsblk -o NAME,FSTYPE,SIZE,TYPE,MOUNTPOINTS'
 
 # Always use sudo when using nmap.
 alias nmap='sudo -E nmap'

.bashrc.d/aping.bash

@@ -0,0 +1,11 @@
+aping() { # aping: beep when ping fails (reverse behavior of `ping -a <address>`)
+	local address="$1"
+	while true; do
+		if ping -c 1 $address; then
+			:
+		else
+			printf "\a"
+		fi
+		sleep 1
+	done
+}

.bashrc.d/cn-fwupd.bash

@@ -1,20 +0,0 @@
-cn-fwupd() {
-	local addr="$1"
-	local puf="$2"
-	local ext="${puf##*.}"
-
-	case $ext in
-
-		zip)
-			printf 'put %q firmware/update.zip' "$puf" | cnsftp $addr
-			cnssh $addr pushupdate FULL
-			;;
-		puf)
-			printf 'put %q firmware/' "$puf" | cnsftp $addr
-			cnssh $addr puf
-			;;
-		*)
-			echo "Error: Bad file type. Currently, only'.zip' and '.puf' file types are supported."
-			;;
-	esac
-}

.bashrc.d/cn-progload.bash

@@ -1,46 +0,0 @@
-cn-progload() {
-	local addr="$1"
-	local project="$2"                     # /foo/bar/baz.bunk
-	local ext="${project##*.}"             # bunk
-	local projfname="${project%.*}"        # /foo/bar/baz
-	local projfnamebase="${projfname##*/}" # baz
-	local zigstash
-	zigstash="$(mktemp /tmp/$projfnamebase.XXXX.zig)"
-	# Add a zero in front of the 3rd arg
-	local slot="0${3}"
-	# expand only to the last 2 digits of $slot 
-	slot="${slot: -2}"
-
-
-	case $ext in 
-
-		vtz)
-			if [[ -n $slot ]]; then
-				echo "==NOTICE== Ignoring slot number for touchpanel project..."
-			fi
-			printf 'put %q %q' "$project" "/display/"| cnsftp "$addr"
-			cnssh "$addr" projectload
-			;;
-
-		lpz)
-			if [[ -z $slot ]]; then
-				echo "==NOTICE== No target program slot defined. Assuming Slot 01..."
-				slot=01
-			fi
-			# Stop and delete current program in $slot
-			cnssh "$addr" killprog -P$slot
-			# Upload
-			printf 'put %q %q' "$project" "/Program$slot" | cnsftp "$addr"
-			# Load the program
-			cnssh "$addr" progload -p:$slot
-			# Zip up the sig file in a temporary location
-			zip -j - "$projfname.sig" > "$zigstash"
-			# Upload the zig
-			printf 'put %q %q' "$zigstash" "/Program$slot/$projfnamebase.zig" | cnsftp "$addr"
-			;;
-
-		*)
-			echo "Error: Bad file type. Currently only supports vtz and lpz projects."
-			;;
-	esac
-}

.bashrc.d/cn-scp.bash

@@ -1,63 +0,0 @@
-cn-scp() {
-
-	shopt -q extglob; local extglob_set=$?
-	if ((extglob_set)); then
-		echo "cn-scp: extglob must be set for this function to work properly."
-		return 1
-	fi
-	local source="$1"
-	local dest="$2"
-	local sep=":"
-	local host sourcefile destfile
-
-
-	if [[ -z $source ]]; then
-		echo "Error: No source provided"
-		return 1
-	elif [[ -z $dest ]]; then
-		echo "Error: No destination provided"
-		return 1
-	fi
-
-
-# Host determination:
-	local loopcount=0
-	for i in "$source" "$dest"; do
-		case "$i" in 
-			# Will match if $sep exists in string once
-			*@("$sep")* )
-				# Check if $host is unset
-				if [[ -z $host ]]; then
-					host="${i%%:*}"
-					sourcefile="${source#*:}"
-					destfile="${dest#*:}"
-					# If this is the first run of the loop, the remote is the source
-					if [[ "$loopcount" == 0 ]]; then
-						operation="get"
-					# If this is the second run of the loop, the remote is the dest
-					elif [[ "$loopcount" == 1 ]]; then
-						operation="put"
-					# If this is anything other than the first or second loop, GTFO
-					else
-						echo "Error: Loop counting error."
-						return 1
-					fi
-					continue
-				else
-					echo "Error: Remote path for *both* source and destination is not supported."
-					return 1
-				fi
-				;;
-			*)
-				((loopcount++))
-				continue
-				;;
-		esac
-		((loopcount++))
-	done
-# END: Host determination
-
-
-	printf '%q %q %q' "$operation" "$sourcefile" "$destfile" | cnsftp "$host"
-
-}

.bashrc.d/cnssh.bash

@@ -1,154 +0,0 @@
-cnssh() {	# Helper for sshing into Crestron devices
-		# 
-		# USAGE
-		#
-		#	cnssh <ip address> [command]
-		#
-		#
-		# OPTIONS
-		#
-		#	-u <username>		Specify the username to use with ssh
-		#				  Default: "Crestron"
-		#
-		# CONFIG ARRAY: cnssh_conf
-		#
-		#
-		#	| Option	| Valid Args	| Default	| Description					|
-		#	| ------------- | ------------- | ------------- | --------------------------------------------- |
-		#	| uname		| <string>	| "Crestron"	| The username for use with ssh			|
-		#	| pass		| <string>	| ""		| The password for use with ssh (via sshpass)	|
-		#	| addr		| <string>	| <ip address>	| The address of the remote device		|
-		#	| cmd		| <string>	| [command]	| The command to execute on the remote device	|
-
-
-	####
-	# Config init
-
-	# Initialize runtime config array
-	declare -A conf
-
-	# Initialize config array if it doesn't already exist
-	if [[ ! -v cnssh_conf[@] ]]; then
-		declare -A cnssh_conf
-	else
-		for opt in "${!cnssh_conf[@]}"; do
-			conf[$opt]=${cnssh_conf[$opt]}
-		done
-	fi
-
-	# Initialize and populate default config array
-	declare -A dconf
-	dconf=(
-		[method]="ssh"
-		[uname]="Crestron"
-		[pass]=""
-	)
-
-	# Apply defaults to running config
-	for opt in "${!dconf[@]}"; do
-		# Don't apply the default if it's already set
-		if [[ ! -v conf[$opt] ]]; then
-			conf[$opt]=${dconf[$opt]}
-		fi
-	done
-
-	declare -A sshopts
-	sshopts=(
-		[StrictHostKeyChecking]="no"
-		[GlobalKnownHostsFile]="/dev/null"
-		[UserKnownHostsFile]="/dev/null"
-		[LogLevel]="ERROR"
-	)
-
-	# Config init
-	####
-
-
-	####
-	# Option Parsing
-
-	while getopts ":u:" opt; do
-		case $opt in
-			u)
-				conf[uname]="$OPTARG"
-				;;
-			\?)
-				echo "Unknown option -$OPTARG"
-				return 1
-				;;
-			:)
-				echo "Option requires argument: -$OPTARG"
-				return 1
-				;;
-		esac
-	done
-
-	# Remove parsed options from $@
-	shift $((OPTIND -1))
-
-	# Set the address based on the first 
-	#  arg if not already set in config array
-	if [[ ! -v conf[addr] ]]; then
-		conf[addr]="$1"
-		shift 1
-	fi
-
-	# Set the command as the rest of argv
-	#  if not already set in config array
-	if [[ ! -v conf[cmd] ]]; then
-		conf[cmd]="$*"
-	fi
-
-	# Set ssh user name
-	sshopts[User]="${conf[uname]}"
-
-	# Set ssh host if not using sftp mode
-	case ${conf[method]} in
-		ssh)
-			:
-			;;
-		sftp)
-			unset "conf[cmd]"
-			;;
-		*)
-			echo "Unknown method: ${conf[method]}"
-			;;
-	esac
-
-	# Option Parsing
-	####
-
-
-	####
-	# Main
-
-	sshpass -p "${conf[pass]}" \
-		"${conf[method]}" \
-		$(	# Format sshopts as a string that an ssh program understands
-			for opt in "${!sshopts[@]}"; do
-				printf '%s %s=%s ' "-o" "$opt" "${sshopts[$opt]}"
-			done
-		) \
-		"${conf[addr]}" \
-		"${conf[cmd]}"
-
-	# Main
-	####
-}
-
-
-cnsftp() {
-	# Initialize config array if it doesn't already exist
-	if [[ ! -v cnssh_conf[@] ]]; then
-		declare -A cnssh_conf
-	fi
-
-	# Set sftp mode instead of ssh
-	cnssh_conf[method]="sftp"
-	cnssh_conf[addr]="$*"
-
-	cnssh
-
-	unset "cnssh_conf[method]"
-	unset "cnssh_conf[addr]"
-}

.bashrc.d/mkcdtemp.bash

@@ -0,0 +1,3 @@
+mkcdtemp() {
+	cd "$(mktemp -d)" || return
+}

.bashrc.d/newfiles.bash

@@ -0,0 +1,27 @@
+newfiles() {
+
+	# Path to watch. If the first parameter isn't set, just use /dev/
+	local path="${1:-/dev/}"
+
+	# Seconds without new events before exiting inotifywait
+	local timeout=10
+
+	printf "New files in %s:\n\n" "$path"
+
+	inotifywait \
+		--monitor \
+		--event create \
+		--timeout $timeout \
+		--format '%w%f' \
+		--quiet \
+		"$path"
+
+	local return=$?
+	if [[ $return == 2 ]]; then
+		printf "\nNo new events in %s seconds. Exiting.\n\n" $timeout
+		return 0
+	else
+		printf "\nE: inotifywait returned %s. Exiting.\n\n" $return
+		return $return
+	fi
+}

.bashrc.d/phsp.bash

@@ -0,0 +1,48 @@
+phsp() {
+	local input="$*"
+	local char
+	local out
+
+	# Iterate over each character in the string
+	for i in $(seq 0 ${#input}); do 
+		# Get the current character using parameter expansion
+		char=${input:$i:1}
+		# Match against alphabet (using uppercase of variable)
+		case ${char^^} in 
+			A) out="Alfa" ;;
+			B) out="Bravo" ;;
+			C) out="Charlie" ;;
+			D) out="Delta" ;;
+			E) out="Echo" ;;
+			F) out="Foxtrot" ;;
+			G) out="Golf" ;;
+			H) out="Hotel" ;;
+			I) out="India" ;;
+			J) out="Juliett" ;;
+			K) out="Kilo" ;;
+			L) out="Lima" ;;
+			M) out="Mike" ;;
+			N) out="November" ;;
+			O) out="Oscar" ;;
+			P) out="Papa" ;;
+			Q) out="Quebec" ;;
+			R) out="Romeo" ;;
+			S) out="Sierra" ;;
+			T) out="Tango" ;;
+			U) out="Uniform" ;;
+			V) out="Victor" ;;
+			W) out="Whiskey" ;;
+			X) out="X-ray" ;;
+			Y) out="Yankee" ;;
+			Z) out="Zulu" ;;
+			[[:space:]]) out="" ;;
+			*) out=""
+		esac
+
+		if [ "$out" ]; then
+			printf "%s: %s\n" "$char" "$out"
+		else
+			printf "\n"
+		fi
+	done
+}

.bashrc.d/weechat.bash

@@ -1,4 +1,4 @@
 # If you don't have weechat installed, connect to the existing tmux session through mosh
-[[ ! -s /usr/bin/weechat ]] && alias weechat='mosh vps -- tmux attach -dt weechat'
+[[ ! -s /usr/bin/weechat ]] && alias weechat='mosh thurstyserv -- tmux -L tl-weemux attach -dt tl-weemux'
 # If you are thurstylark-vps, connect to the existing tmux session locally
-[[ "$HOSTNAME" = "thurstylark-vps" ]] && alias weechat='tmux attach -dt weechat'
+[[ "$HOSTNAME" = "thurstyserv" ]] && alias weechat='tmux -L tl-weemux attach -dt tl-weemux'